debarr

Welcome to deBarr

We are a Company with more than 20 years of experience in engineering and project management in Energy Control Centers SCADA/EMS/DMS, Electric Power Systems and Applied Information Technology

Energy Control Centers SCADA/EMS/DMS Audits

We offer this service to assess the state of Critical Systems Center Control: Performance Systems, Access, Security, Emergency Plans, Maintenance, State Applications SCADA / EMS / DMS ...

Electrical System Evaluation

Now we have more and state of the art equipment for inspection and analysis of power supply and electricity infrastructure

Energy and Demand Measurement
Power Quality (Harmonics,over/under voltages, DIP/SWELL, Inrush ...)
Detection of abnormalities that cause failure or damage to electrical equipment
Load Balancing
Circuit Tracing
Electrical one-line drawings
Development of energy saving plans
For Industries, Shopping Malls, Hospitals and Office Buildings

DeBarr Electrical Engineers has over 20 years experience. Contáctenos a Contact us at This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Disaster Prevention in SCADA, telecommunications rooms, data centers, UPS, ATM...

Today the majority of disasters in its facilities and equipment can be prevented in time if we have an appropriate solution for you to monitor, detect and take immediate action to avoid them.

We have a range of solutions for the monitoring of safety and environment variables which will enable it to prevent disaster in your datacenter, Telecommunications rooms, Generators, UPS, ATMs and buildings in general as part of their critical systems. deBarr distributes and installs AKCP Inc. solutions who is the oldest manufacturer of SNMP based environmental and safety monitoring. AKCP devices can take immediate action in case detection alarms, send emails and SMS / MMS, activate audible alarms, turn off or on equipment and to record images and video of the area where the event is happening.

These devices allow the recording and graphing real-time data from different sensors and also allow other systems to be integrated network management of your company that support SNMP protocol as OpenNMS, Nagios and others. Installation is easy thanks to AKCP intelligent sensors, which are automatically detected by the principal device. In addition will provide support in all phases of your project.
No special software is required for programming and operation. You only need a web explorer and you'll get an friendly user interface.
Also, if you have Internet connection, at any time and place you can connect remotely to the system in real time to verify what is happening!

Benefits:

• Reduce Accidents
• Reduce downtime and improve availability losses associated with early notification of potential problems and speed up repair times if a failure occurs
• Easy to Implement
• Improvement in the satisfaction of employees and executives because of the advance notification

Applications	Sensors	Notifications and actions
Computer Centers UPS, Generators Telecommunication Rooms Network devices ATM Air Conditioning Cold Storage and Food Industry Warehouses Medical and Pharmaceutical Industry Real Estate	Temperature Humidity Water Movement Dry contacts Audio Level Energy Power 4-20mA signals Video Signals from other devices with SNMP protocol Virtual Devices (snmp. modbus, ping...) and more ...	Email sms mms SNMP Notifications FTP Uploads Visual and audible alarms Telephone or fax Relays Video and audio recording

Application Example:

The new EL-USB-2-LCD Lascar data logger

Lascar Electronics has launched the first EasyLog temperature and humidity USB data logger with built-in display. By simply pressing a button on the logger itself:

View last log the unit made
Highest and lowest logs made during the whole logging session
View general conditions the logger has been exposed to without taking it back to the computer
Choose optional Push-to-Start mode
Optional Rollover mode for continual logging

The EL-USB-2-LCD records temperatures from -31ºF to +176ºF / -35 to +80ºC and relative humidity from 0 to 100% at user defined sample rates. Power is supplied from a 3.6V ½AA lithium cell which will typically provide 6 or more months of use. Lascar's FREE configuration software uses an intuitive 'wizard' based approach that makes setup and download of the EL-USB-2-LCD particularly straightforward.

The EL-USB-2-LCD is available immediately including software and battery. Significant discounts are available for purchases of 10 or more pieces. For more information about the EL-USB-2-LCD and the EasyLog USB range of data loggers contact us here .

Datasheet

To see the Lascar products we carry press here

Registrador de Corriente 4-20 mA

Monday, 16 February 2009 15:36 Ventas

You can now verify the proper functioning of 4-20 mA current loop output transducer, using the Lascar Datalogger EL-USB-4.

This recorder lets you record up to 32,000 readings with intervals between 1 second to 12 hours connected to your instrument in the field without any external power source because.

It has an accuracy of + / - 1 counts and operates in temperature ranges from -35 to 80 ° C